Guide to Mesh MK1 Grill?

[Eskimo]

Is there guide for this? Or just copy MK2 1? And i can't find MK2, Can someone link me it please if that's only 1 to follow.

[bluearmy]

it is quite an easy job mate,all you have to do is undo the 3 bolts i think it is on the top of the grill under bonnet, then slide both indicators out and you will see just below each indicator a little white clip use a small screwdriver to lever these upwards and off. Then the whole grill will come out. Once out from the back of it undo all the screws and the slats will come out, you are then left with a whole if you like lay it face down lay your mesh in it shape the mesh so it fits nice in the back of the grill then just put silicone on the rear of the grill and push your mesh onto the silicne, use a few clamps if you have some to hold the mesh tight against the grill and in place leavea good day to go off then refit, job done. Hope this helps