Made a noob mistake help needed

[Aly]

Yesterday I painted all my brake callipers.
To get the best finish I used Hammerite Spray rather than the tin and brush.

Masked everything up and they've turned out brilliant, only today I have realised there is red spray dots everywhere

They are only very light, I have no idea how I sprayed very close and it wasn't windy.

I've used mentholated spirits and it works but takes a lot of time, anyone got any ideas how to remove it from glass and from my wheels?

Cheers

[Aaron]

clay bar?
t cut ?

[moxy89]

machine polish !!! or clay

[harry289]

give SMART WAX a try. The pink stuff.

At the autosport show demonstration it removed spray paint from a cars bodywork, and you can use the stuff on almost every part of your car, even glass.

http://www.amazon.co.uk/Smart-Wax-Po...3810811&sr=8-2

[Aly]

Originally Posted by Aaron

clay bar?
t cut ?

Originally Posted by moxy89

machine polish !!! or clay

Originally Posted by harry289

give SMART WAX a try. The pink stuff.

At the autosport show demonstration it removed spray paint from a cars bodywork, and you can use the stuff on almost every part of your car, even glass.

http://www.amazon.co.uk/Smart-Wax-Po...3810811&sr=8-2

Cheers guys!
I tried claying and it works really well but seems like it's going to take ages

A time consuming mistake.

[MikeyW]

If your not after an urgent fix, I can send you a block of aggressive clay if you want ? Would work faster and if lubed up properly wouldn't marr.

[Carl-h]

I'd only use clay personally.

[Jamie]

As above, more so the aggressive clay, just be careful of marring with lots of qd.