How to get flames from a saxo

[bengtt5]

its called having a switch that cuts power to your coil

[SaxSpeed]

thats basicly flamer kit lol

[Coonper]

Originally Posted by SaxSpeed

thats basicly flamer kit lol

Far from it...

As said, a switch that cuts power to the coil. Then when you flick off the switch, the spark stops, the ecu is still fueling the chambers, then you flick the ignition back on, and BOOOOMMM!!!!!!

[bengtt5]

and eventually itll boom for its last time
normally ive seen melted valves

[Coonper]

Originally Posted by bengtt5

and eventually itll boom for its last time
normally ive seen melted valves

I did it for over a year, and never went a day without having a booming session. Never missed a beat.

Then did it on my next car too! I know 10's of people who do it.

[rorz_vts]

Originally Posted by bengtt5

and eventually itll boom for its last time

yea my mate used to do this in his vtr then his c20xe then on his c20let fucked the coils on all off them

[Coonper]

Originally Posted by rorz_vts

yea my mate used to do this in his vtr then his c20xe then on his c20let fucked the coils on all off them

Cant say any of my XE's have ever suffered from it, nor have the coils...

[-shuggles-]

I got told its bad for valve stem oil seals?

sounds great when its natural backfires tho

[saxdazza]

my 8v pops and bangs sometimes when you let off after giving it some or when i drop through the gears never tried to make it flame though.

[Lewis1600]

My old VTR had a raceland 4-2-1 - decat- striaght through - Peco Backbox

Used to spit flames, bang, pop when ever I wanted it to really..

Was over fueling a tad though

Used to love it when doing some spirited driving changing gear and a little bang from the back or on down shifts around about 4krpm

[skitts]

was it mk1 or mk2 ? and mine pops now and again but not alot

[jeppy24]

My vtr pops and bangs all the time, its sounds good but it dosent flame. Only way too get it to flame is to have no boxes in the exhaust at all so a 4-2-1 mTiold and a pipe all the way to the back (no backbox) then you need to set the car up so that it over fuels like mad and the spark plug sparks late then it might flames.

[Lewis1600]

Originally Posted by skitts

was it mk1 or mk2 ? and mine pops now and again but not alot

Its was a 2001 mate mk2 98bhp....

sounded really good..


I had another VTR then an 02 plate i put a mk1 manifold on it (decat) and the same backbox... and i could make that pop aswell...

but not on shifts etc....

[titchster]

Originally Posted by jeppy24

My vtr pops and bangs all the time, its sounds good but it dosent flame. Only way too get it to flame is to have no boxes in the exhaust at all so a 4-2-1 mTiold and a pipe all the way to the back (no backbox) then you need to set the car up so that it over fuels like mad and the spark plug sparks late then it might flames.

Not true. I had standard manifold, a centre silencer, and a huge backbox (as in actual backbox was long, not a big tailpipe), and on my 16v that setup would spit flames on upchange, or if I tapped the throttle at anything over 5k.


Having a cat will stop flames though.

[jonesyFX]

courtesy of Aly

CLICKY

[bengtt5]

Originally Posted by jonesyFX

courtesy of Aly

CLICKY

bit wobbly with the camera aint ya

[citroen_saxo_vtr]

My 16v spit flames big time lol follow me down the road skitts then you will see what i mean full decat works a treat!! apparently it shoot a big flame a foot long out the back haha.

[minimanspk]

if you wanna make flames ask the guy at bassets pole who owned the black saxo I would of thought he would have a few tricks up his sleeve

[J222JRA]

Flames from your exhaust.....i wish my Saxo was that cool............

[raunchz]

petrol and a lighter